Oil Side Wall Vent System
SIDESHOT® SERIES MODELS SS1 & SS2

The SideShot® models SS1 and SS2 SideWall Vent Systems include the UC1 Universal Control for increased safety, performance and reliability. Designed for oil fired heating equipment or a deluxe gas vent system.  Patented vent termination propels flue gases at high velocities away from the building exterior, a necessity when venting oil fired equipment. Both models can be installed with zero clearance to combustible materials and have stainless steel construction in critical areas.  Factory wired safety and operating controls allow for simple interlock with any burner. The new model SS2 features a self-cleaning stainless steel, backward inclined impeller and sealed ball bearing motor for virtually maintenance free installations.  Ultra-fine draft adjustment and slide-out access to all internal components. 

	Additional controls are necessary for multiple appliances.   Available interlocking controls include the MAC Series multiple appliance control. Please call to inquire about side venting more than 1 appliance using one SideShot.
Click for a  bigger pic		Click for PDF Literature

SIDESHOT® MODEL SS1

Click For Installation Instructions
SS1 DIMENSIONS/font>

---

A	B	C	D	E	F	G	H	I
27 3/8"	16 1/2"	12 1/4"	8"	13 3/4"	15 1/8"	7 3/4"	14 3/4"	23 1/4

Note: The SS1 requires an 8"H x 8 3/8"W opening through the wall SIDESHOT® MODEL SS1 APPLICATION TABLES Verify that the total BTU/hr input of the heating appliance(s) fall within the proper category listed below.  Please note the capacity differs between the SS1, SS1C and SS2.  To determine equivalent feet, add the total length of straight vent pipe plus 10 feet for each 90 degree elbow and 5 feet for each 45 degree elbow.  Vent runs over 15 linear feet should use an approved, insulated vent connector to prevent problems related to condensation.   Multiple appliance interlocks require the use of our MAC-Series Multiple Appliance Controls. The SS1 & SS1C feature a bottom or rear vent connection.  The inlet collar accepts any brand or type of 6" diameter vent pipe.

SS1 CAPACITY

MODEL	NATURAL AND LP GAS	FLAME RETENTION OIL BURNER	CONVENTIONAL  OIL BURNER	MAX. EQUIVALENT FEET
SS1	50,000-160,00 BTU/hr.	50,000-220,000 BTU/hr. 1.55 gal/hr. max.	50,000-180,000 BTU/hr. 1.25 gal/hr. max.	50 feet

SIDESHOT® MODEL SS2

Click For Installation Instructions
SS2 DIMENSIONS

Note: The SS2 has a 4" vent connector. Install full size vent pipe and reduce at SS2 connector. The SS2 requires an 8 1/2"H x 10 1/2"W opening through the wall. SIDESHOT® MODEL SS2 APPLICATION TABLES Verify that the total BTU/hr input of the heating appliance(s) fall within the proper category listed below.  Please note the capacity differs between the SS1, SS1C and SS2.  To determine equivalent feet, add the total length of straight vent pipe plus 10 feet for each 90 degree elbow and 5 feet for each 45 degree elbow.  Vent runs over 15 linear feet should use an approved, insulated vent connector to prevent problems related to condensation.  Multiple appliance interlocks require the use of our MAC-Series Multiple Appliance Controls.

Click for full PDF literature